BAAK Lowering kit for Triumph - Bonneville T100/120 (2016-present)



Availability: 2 weeks of waiting time

Aluminium upper triple trees for lowering, available for Triumph Bonneville T100 / T120 (from 2016). It includes the flat triple trees, the handlebar clamps, the ignition switch and / or speedometer bracket, and the optional short shock absorbers.

This lowering kit was designed and manufactured at BAAK's workshop.

This flat upper triple trees made out of machined aluminium has the same width as your original one but enables to lower the front end of your bike by 25mm without lifting up the fork tubes over the stock triple trees, for a perfect aesthetic result.

The handlebar clamps are available in 1 inch (25,4mm) or 28,6mm diameter.

Beware to choose the corresponding option for your kit :

  • With relocated ignition switch bracket only
  • with original speedometer bracket / relocated ignition switch bracket
  • With ignition switch and speedometer bracket

If you go for the versions of this kit not including a Ignition switch support, you will receive our Ignition switch relocation bracket in your parcel. The handlebar clamps are available in 1 inch (25,4mm) or Fatbar (28,6mm) diameter.

The optional shock absorbers enable to proportionally lower the rear end of the Thruxton with our Short Big Body shock absorbers for Triumph (since 2016). It's available in Full black finish, or grey body and black springs.

This part is mounted on our Triumph Bonneville T120 Dandy Bonnie and Thruxton 1200 Tracker.

Comes without speedometer or ignition switch. All the stainless steel screwing is provided.